The PD200 is a wide-bandwidth, low-noise linear amplifier for driving piezoelectric actuators and other loads. The output voltage range can be unipolar, bipolar, or asymmetric from 50V to 200V which suits stack actuators, solid piezoelectric actuators, and three-wire piezoelectric benders. The output connectors include BNC, screw terminals, LEMO 00, and LEMO 0B so many piezoelectric actuator assemblies can be directly connected.
PD200是用于驱动压电执行器和其他负载的宽带宽，低噪声线性放大器。 输出电压范围可以是50V到200V的单极，双极或不对称电压，适用于堆叠执行器，固体压电执行器和三线压电弯曲器。 输出连接器包括BNC，螺钉端子，LEMO 00和LEMO 0B，因此可以直接连接许多压电执行器组件。
Key features include:主要功能包括：
- Output voltage ranges from +/-100V to +200V 输出电压范围为+/- 100V至+ 200V
- Up to +/-200V and 120W in bridge mode 桥接模式下可达+/- 200V和120W
- Up to 10A peak output current 高达10A的峰值输出电流
- Exceptional full power bandwidth, 230 kHz 卓越的全功率带宽，230 kHz
- Exceptional signal bandwidth, 680 kHz 卓越的信号带宽，680 kHz
- Less than 714uV RMS noise with a 10uF load 10uF负载时噪声小于714uV RMS
- Short-circuit and thermal protection with external monitoring and shutdown 具有外部监视和关闭的短路和热保护